Models and Features |
REF-500 (A725) |
| Temperature Range C° | 0 / 15 C° |
| Set Point C° | + 4 C° |
| Wire Shelves | 5 |
| Stainless Steel Inner Body Cr-Ni | + |
| Digital Microprocessor Control | + |
| Alarm (temperature,open door,electricity) | + |
| Interior Lighting | + |
| External Dimensions WxLxH mm | 765 x 820 x 2000 |
| Internal Dimensions WxLxH mm | 690 x 685 x 1350 |
| Gross Weight (kg) | 215 |
| Gross Volume Lt | 670 |
| Net Volume Lt | 638 |
| Door Lock | + |
Our kit refrigerators are produced with six different choices of capacity.
- The outer surface of the device has been produced of galvanized sheet with electrostatic paint resistant to rust and the inner surface is produced of stainless steel sheet.
- Operates with 195-230 V/50 Hz network voltage.
- The door of the device has polyurethane insulated block door system with double thermal glazing. It can be locked and has magnetic seal rings.
- There is a plastic covered wire shelves in the device that can be adjusted according to the desire of the user.
- Operates between +0/+15 degrees and it is set to +4 degrees.
- Provides equal temperature distribution with the strengthened fan system it contains.
- Works smoothly and quitely.
- In order to protect the productivity of the device cooling evaporator, there is full- automatic defrosting system.
- The lightening of the inner cabin of the device is carried out with LED lightening.
- A user-friendly digital control panel with a micro processor has been used on the device.
- The thermostat at the control panel of the device can make measurements with 0.1 degree sensitivity.
- There is an accumulator system charged automatically at the control panel of the device. This system provides that at possible electricity cut offs the digital
control panel and the thermal printer continue working for 72 hours. - While the refrigerator is working the device gives alerts with the visual and audio signal when the lower and upper temperature limits are exceeded, the door
of the device is left open, and there is electricity cut off or low voltage problems. - The cooling system and the insulation system of the device do not contain CFC gas that is harmful for OZONE.
- There are two wheels with stoppers and two regular wheels on the device to provide easy portability
- All medical devices produced by Emsaş A.Ş. are guaranteed for 2 years.
- As per the request of the user, a thermal printer can be installed at the device. The numerical and graphical printout of the data recorded with the thermal
printer can be taken. - All our products are produced in line with the ISO 9001:2008, TSE service place competence certificates. The device has CE certificate and barcode.
- Sensor calibration settings can be made by electronic card through.
