T100 Stirred Thermostatic Baths and Heating Circulators (BIOSAN)
Description
The T100 series of general purpose heating circulating baths offer accurate temperate control for staightforward applications in the range of 0°C to 100°C. The T100 heating circulator can be used in combination with any Grant stainless steel or plastic tank or with a T-CLAMP for independent use of virtually any vertical sided tank.
- Cooling/heating range 0°C to 100°C
- Stability ±0.05ºC / Uniformity ±0.1ºC
- Tank options 5L to 38L
- 3 programmable temperature presets
- Low liquid protection and fixed over temperature cut-out
- Visual alarm – alerts you when your attention is required
- Clear, bright 4 digit LED display
Applications
- Clinical, Microbiology and Pathology labs – media tempering, thawing and incubating samples
- Teaching labs, higher education/universities – practical demonstration/experimentation, sample preparation
Note:
- specification for T100 + 5/12 litres plastic/stainless steel bath, other thermostats and water bath combinations available.
- operation below ambient temperature requires accessory cooling C1G
Specification
| Cooling/heating range | -> |
|---|---|
| T100-P5 | amb. +15 … 99°C |
| T100-P12 | amb. +5 … 99°C |
| T100-ST5 | amb. +15 … 100°C |
| T100-ST12 | 0 … 100°C |
| Stability at 70°C | ±0.05°C |
| Uniformity at 70°C | ±0.1°C |
| Setting resolution | ±0.1°C |
| Display | 4 digit LED |
| Tank volume | 5 or 12 litres |
| No. of pre-set temperatures | 3 |
| Recalibration points | 2 |
| Safety overtemperature | fixed |
| Heater power (230 V) | 1.3 kW |
| Height above tank rim | 200 mm |
| Depth below tank rim | 135 mm |
